Installation - Kaiser S 45 70 XL Gebrauchsanweisung

EN
INSTALLING THE FREE STANDING
DISHWASHER (MODEL S 4570 XL)
Place the dishwasher close to the water supply
and sewerage inlets as well as to the electrical
outlet.
Once the appliance is positioned, level the
dishwasher by adjusting the feet 1 (screw in or
out). The inclination angle must not exceed more
than 2°.
The dishwasher is equipped with water inlet and
1
1
drain hoses which can be fixed on the right or on
the left to enable proper installation.
INSTALLING THE DISHWASHER
(MODEL S 45E70 XL)
Before installing the dishwasher, carry out the
following preparatory steps:
Make sure you have enough space to install the
820
appliance and to connect the water inlet and drain
80
hoses as well as the electrical cord 2.
2
The installation space measurements are given in
mm.
100
450*
12