Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
32
2
2
3
1
1
EQUIPMENT
LOADING THE DISHWASHER RACKS
To
achieve
a
better
dishwasher,
keep
guidelines.
The construction and the design of tableware and
cutlery racks may vary depending on the model.
The
consumer
qualities,
unaffected.
Using the upper rack
The upper rack is designed to hold more delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as plates, small
bowls and shallow pans (as long as they are not
too dirty).
Position the dishes and cookware so that they do
not get moved by water sprays.
The upper rack can be adjusted at different height
by putting wheels 1 into rails. For this purpose it is
necessary to remove stoppers of the rails.
The upper rack is equipped by folding frames 2
which allow to place tea cups at two levels
effectively and to keep high wine glasses safe
while washing.
Additional rack
Special design of the additional rack 3 for cutlery
enables you to conveniently arrange forks, spoons,
large knives or ladles, so that they don't get into
contact.
Thanks to that, a thorough and at the same time
sparing washing as well as profound drying –
without any spots left – is provided.
After the washing has been finished, you can take
out the cutlery rack and conveniently arrange it for
unloading.
EN
performance
of
to
the
following
loading
however,
remain
the
Werbung
Inhaltsverzeichnis
