Mechanical Tests - Siemens SIPROTEC 4 7XT34 Produktinformation

10.3 Mechanical Tests

Vibration and Shock Stress in Stationary Use
Standards
Vibration Test (sinusoidal)
IEC 60255-21-1, class 1 and
IEC 60068-2-6
Shock Test
IEC 60255-21-2, class 1
Seismic Tests
IEC 60255-21-3, class 1 and
IEC 60068-3-3
Vibration and shock stress during transport
Standards
Vibration Test (sinusoidal)
IEC 60255-21-1, class 1 and
IEC 60068-2-6
Shock Test
IEC 60255-21-2, class 1 and
IEC 60068-2-27
Continuous shock
IEC 60255-21-2, class 1 and
IEC 60068-2-27
SIPROTEC 4, 20-Hz Band-pass Filter 7XT34, Product Information
C53000-B1174-C130-5, Edition 09.2016
IEC 60255-21 and IEC 60068
Sinusoidal 10 Hz to 60 Hz: ± 0.035 mm
amplitude
60 Hz to 150 Hz; 5 m/s
Frequency sweep 1 octave/min
20 cycles in 3 axes perpendicular to one
another
Semi-sinusoidal
2
Acceleration 50 m/s
Duration 11 ms
3 shocks each in both directions of the 3 axes
Sinusoidal 3 Hz to 35 Hz:
Frequency sweep 1 octave/min
1 cycle in 3 axes perpendicular to one another
3 Hz to 8 Hz: ± 3.5 mm amplitude (horizontal
axes)
3 Hz to 8 Hz: ± 1.5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 10 m/s
axes) 8 Hz to 35 Hz: 5 m/s
(vertical axis)
IEC 60255-21 and IEC 60068
Sinusoidal 5 Hz to 8 Hz: ± 3.5 mm
amplitude
8 Hz to 150 Hz: 10 m/s
Frequency sweep 1 octave/min
20 cycles in 3 axes perpendicular to one
another
Semi-sinusoidal Acceleration 150 m/s
Duration 11 ms
3 shocks each in both directions of the 3 axes
Semi-sinusoidal Acceleration 100 m/s
Duration 16 ms
1000 shocks each in both directions of the
3 axes
2
acceleration
2
acceleration (horizontal
2
acceleration
2
acceleration
2
2
17