Dimensions - Siemens SIPROTEC 4 7XT34 Produktinformation

7

Dimensions

7.1 7XT34 Housing for Panel Surface Mounting 7XP2040-1
Figure 7-1 7XT34 Housing for Panel Surface Mounting 7XP2040-1
10
Rear view
225 (8.86)
220 (8.66)
239 ,5 ±0,3 (9.43 ±0.01)
Mounting panel
Drill hole diameter in panel Ø 7mm(8x) for screw size M6
*) For panel surface mounting the following parts are necessary :
2x angle brackets C73165 -A63-C201 -*, 4x distance elements C73165 -A63-C203-* and 8x stainless
steel screws size M4 .
Fit threaded holes M 6, bolts M6 or suitable dowel drill holes into the panel according to the drawing .
Mount the angle brackets to the mounting brackets of device housing using standard screws size M4.
Fasten the device with the fixed set angle brackets to the panel , using the distance elements and M 6
screws. When using fixed bolts : Fit the distace elements onto the bolts and fasten the device with nuts.
SIPROTEC 4, 20-Hz Band-pass Filter 7XT34, Product Information
Side view
172 (6.77)
29,5 (1.16)
Angle bracket *)
32 (1.26)
Distance element *)
Top view
Dimensions in mm
Values in Brackets in inches
C53000-B1174-C130-5, Edition 09.2016
66,7 (2.62)