Siemens SIPROTEC 4 7XT34 Produktinformation Seite 38

7.2 7XT34 Housing for Panel Flush Mounting or Cabinet
Flush Mounting 7XP2040-2
Drill hole diameter in panel Ø 7mm(8x) for screw size M6
*)
For panel flush mounting the following parts are necessary :
2x angle brackets C73165 -A63-C201-* and 4x stainless-steel screws size M4,
since the mounting brackets of the device housing are not sufficient for the high weight of the device .
Fix the set angle brackets to the panel , using 8x standard screws size M6 according to the drawing .
Mount the device to the set angle brackets using standard screws size M 4 (no hexagon head screws ).
If the device is mounted in switchgear cabinets , the set angle brackets can be omitted provided that the
cabinet possesses adequate solid mounting brackets .
If not, use a set angle brackets C 73165 -A63-C209 -*(size 28 SEP = 19 inches ).
Figure 7-2 7XT34 Housing for Panel Flush Mounting or Cabinet Flush Mounting
12
225 (8.86)
220 (8.66)
7XP2040-1
SIPROTEC 4, 20-Hz Band-pass Filter 7XT34, Product Information
171, 9 (6.77)
29, 5 (1.16)
Angle bracket *)
32 (1.26)
Mounting panel
All dimensions = mm
Values in brackets in inches
C53000-B1174-C130-5, Edition 09.2016
66,7 (2.62)
+1 +0.04
221 (8.70 )