Safety Warnings; Field Of Application - EMAK BT 5500 Bedienungsanleitung

Congratulations on purchasing an EMAK bioshredder. Th is
machine guarantees optimum long-term functionality, provided
that you observe the following warnings.

SAFETY WARNINGS

WARNING - Before each use, check the safety devices
located on the machine.
1 In addition to the instructions of this manual, all generally
applicable safety and accident prevention standards must be
observed.
2. Th e symbols, warnings and safety descriptions provide
important instructions for safe operation: pay attention to
them in order to ensure your safety.
3. Th e machine must not be used by persons under the age of
18.
4. Th e operator is responsible for the safety of bystanders
within the work area.
5. Wear close-fi tting clothes, ear protection, gloves, safety
shoes and protective eyewear (and a safety visor, whenever
possible).
6. It is prohibited to remain in the hazard zone, especially in
the vicinity of the discharge port.
7. Th e machine must only be positioned and used on stable
surfaces free from obstacles (danger of tipping).
8. To favour the loading of short material, use auxiliary
equipment in the form of circular pieces of wood of suffi cient
length.
9. Before opening the stack or moving away from the machine,
switch off the engine and close the fuel cock.
10. Before starting the machine, carefully read the engine
manufacturer's instruction manual.
11. Do not operate the machine in enclosed areas.
12. Aft er start-up, check that the control lever functions correctly
and familiarise yourself with its operation.
13. Exercise caution when adding fuel: extreme fi re hazard.
Never refuel in the vicinity of naked fl ames, sparks or while
parts of the engine are hot. Do not smoke when refi lling the
fuel tank.
14. Switch off the engine before refuelling. Do not top up petrol
in enclosed areas. Do not spill fuel onto the engine (use
suitable tools for refuelling). To prevent the risk of fi re, keep
the machine clean at all times.
15. V-belt transmission
1. Switch off the engine before installing and removing the
V-belt.
2. Th e V-belt drive guards must remain mounted on the
machine at all times.
3. Aft er the engine is switched off , the machine may continue
to operate due to inertia caused by its fl ywheel mass. Do
not attempt to perform any operation on the machine at
this point. Stay clear of the machine until it has come to a
complete halt.
WARNING - Th e machine may only be operated in
accordance with the above instructions, using the
supplied safety devices.

FIELD OF APPLICATION

Th e machine is designed to crush garden waste including tree
and bush cuttings, dead fl owers etc. For branches thicker than
40 mm in diameter, use the side infeed opening. Th e maximum
diameter of branch which the machine can process is 60 mm.
Th anks to the shredding process, the chopped waste material
transforms into compost much more quickly than it would in
its natural state.
Th e consistency of the shredded material is determined by
an adjustable screen which, in the event of overload, opens
automatically and expels the excess material.
CAUTION -If its consistency is not too fi ne, the waste
material favours the essential supply of oxygen.
SAFETY WARNINGS AND SYMBOLS (Fig.1)
1. Th is symbol indicates Warning and Caution.
2. Carefully read the instruction manual before using the
machine.
3. Wear ear protection when using this unit.
4. Wear eye protection when using this unit.
BIOSHREDDER COMPONENTS (Fig.2)
1. Infeed opening
2. Transport handles
3. Stack
4. Blade inspection access bolts
5. Side infeed opening
6. Transport wheels
7. Sift ing screen control knob
8. Support legs
9. Discharge port
10. Starting cord handle
11. Oil cap
12. Air fi lter
13. Petrol cap
14. Engine switch
S.P.A.
GB
Fig. 1
Fig. 2
5