Specifications - JB Systems DYNAMO 250 Bedienungsanleitung

ENGLISH
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
 The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
 The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
 Clean the external optics at least once every 30 days.
 Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS

Mains Input:
Fuse:
Sound Control:
DMX connections:
Lamp:
Size:
Weight:
You can download the latest version of this user manual on our website: www.jb-systems.eu
JB SYSTEMS
®
AC 230V, 50Hz
250V 3.15A fast blow (20mm glass)
Internal microphone
3pin XLR male / female
ELC 250W/24V
38.5 x 17 x 12cm
4.4 kg
Every information is subject to change without prior notice
6/41
OPERATION MANUAL
DYNAMO 250