Inhaltsverzeichnis; General Safety Instructions; Commissioning The Relay Module Hc60Ng - Honeywell HCW 80 Montage Und Bedienung

Contents
1. General safety instructions .................................... 5
1.1. Commissioning the relay module HC60NG ........... 5
2. Overview ............................................................... 6
2.1. Pre configured kit Y6630D1007............................. 6
2.2. Singly provided devices......................................... 6
3. Installation ............................................................. 6
3.1. Installation relay module HC60NG ........................ 6
3.1.1. Connections for R6660D and HC60NG................. 7
3.2. Installation room unit HCW 80............................... 8
4. Checking ............................................................... 9
4.1. System check ........................................................ 9
4.2. Radio transmission check ..................................... 9
5. Teach-in (singly provided devices only) ................ 9
5.1. Assignment to the relay module HC60NG............. 9
5.2. Failed teach-in....................................................... 9
6. Communication loss .............................................. 9
7. Factory reset of relay module HC60NG ................ 9
8. Particular features of the room unit HCW 80 ....... 10
8.1. Operation ............................................................ 10
8.2. Limiting the adjustment range ............................. 10
8.3. Fixed control parameters..................................... 10
9. Changing batteries .............................................. 10
10. Appendix ............................................................. 11
10.1. Help with problems.............................................. 11
10.2. Specifications HCW 80........................................ 11
10.3. Specifications HC60NG....................................... 11
10.4. Device and function definition in accordance
with EN 60730-1.................................................. 11
10.5. WEEE directive 2002/96/EC - Waste Electrical
and Electronic Equipment directive ..................... 11
1. General safety
instructions
1.1. Commissioning the relay module
HC60NG
DANGER Danger to life due to electric shock!
Contacts that are open are live.
Ensure that the device is de-
►
energised.
Have all the work carried out by
►
authorised qualified personnel.
Observe the valid local regulations
►
during the installation.
WARNING Insufficient data transfer!
Interference of the relay module
HC60NG in the device due to metallic
objects or further frequency devices.
Mount the device with a distance of at
►
least 30 cm to metallic objects such
as wall boxes or boiler housings
according to the DECT standard, etc.
Do not mount on metal wall boxes.
►
WARNING Damage to the device!
Short-circuiting due to humidity and
moisture.
Mount the device at a site that is
►
protected against humidity and
moisture.
WARNING Damage to exposed components!
Destruction of the electronic
components due to electrostatic
discharges.
Do not touch the components.
►
Touch an earthed piece of metal to
►
discharge static electricity from your
body.

General safety instructions

5