Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
HCW 82/HCF 82
Fernversteller HCW 82/
Raumtemperaturfühler HCF 82
Montage und Bedienung
Setpoint Adjuster HCW 82/
Room Temperature Sensor
HCF 82
Installation and Operation
Combiné d'ambiance HCW 82/
Sonde de température
ambiante HCF 82
Installation et Utilisation
Modulo ambiente
HCW 82/HCF 82
Montaggio e Funzionamento
Sensor a distancia HCW 82/
Sensor de temperatura
ambiente HCF 82
Montaje y funcionamiento
Temperatuurvoeler HCW 82/
Temperatuurvoeler met
instellknop HCF 82
Montage en bediening
Fjernregulering HCW 82/
Rumtemperaturføler HCF 82
Montering og betjening

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Honeywell HCW 82

  • Seite 1 Combiné d'ambiance HCW 82/ Sonde de température ambiante HCF 82 Installation et Utilisation Modulo ambiente HCW 82/HCF 82 Montaggio e Funzionamento Sensor a distancia HCW 82/ Sensor de temperatura ambiente HCF 82 Montaje y funcionamiento Temperatuurvoeler HCW 82/ Temperatuurvoeler met instellknop HCF 82...
  • Seite 3: Inhaltsverzeichnis

    • Anschlussmöglichkeit für einen Fensterkontakt ► korrekten Polung ein (siehe Abb. 2). (siehe "Fensterkontakt installieren", Seite 6). Wenn die rote LED am HCW 82/HCF 82 blinkt, müssen • Stellrad, an dem Sie den Raumtemperatur-Sollwert direkt die Batterien erneuert werden (siehe "Batteriewechsel", verändern können.
  • Seite 4: Binding

    2.1.1. Zuordnung zum Etagenregler Zeichnen Sie die Bohrlöcher nach dem Bohrschema ► Um den HCW 82/HCF 82 einer Temperaturzone (siehe Abb. 3). zuzuordnen, führen Sie die Anweisungen aus dem Kapitel "Inbetriebnahme" der Montageanleitung "Etagenregler HCE 80/HCE 80R/HCC 80/HCC 80R" aus.
  • Seite 5: Besonderheiten Hcw 82

    Besonderheiten HCW 82 3.3. Betrieb mit externer Stromquelle 3. Besonderheiten HCW 82 Der Fernversteller HCW 82 ist neben dem Betrieb mit 3.1. Bedienung Batterien auch für den Betrieb mit einer externen Stromquelle vorbereitet. Die Raumsollwert-Temperatur lässt sich am Fernversteller HCW 82 mit einem Stellrad auf einfache Weise einstellen.
  • Seite 6: Fensterkontakt Installieren

    6. Hilfe im Problemfall Schließen Sie einen beliebigen Sensor mit potenzialfreiem ► Problem Ursache Lösung Kontakt an den HCW 82 an (Installation an Anschluss 1 und Anschluss 2, siehe Abb. 7 (2), Seite 5). Binding fehl- Batterien Batterien richtig ►...
  • Seite 7: Commissioning

    Thus a large spectrum of applications can be covered. Bind button 1.2. Differences HCW 82/HCF 82 The HCW 82 has the following functions in addition to those Fig. 2: Battery polarity and Bind button of the HCF 82: Insert the supplied AA batteries with the correct battery •...
  • Seite 8: Binding

    Mark the drill holes according to the drilling template ► controller (see Fig. 3). In order to assign a temperature zone to the HCW 82/ HCF 82, follow the instructions from the chapter entitled "Start-up" in the "Underfloor heating controller HCE 80/HCE 80R/ HCC 80/HCC 80R" installation instructions.
  • Seite 9: Particular Features Of Hcw 82

    Have a power supply unit with 3 V DC ± 10 %, min. 25 mA ► at hand. De-energise the power supply unit. ► Remove the housing cover of the HCW 82 (see Fig. 1, ► Fig. 5: HCW 82 Page 7). Remove the batteries.
  • Seite 10: Installing The Window Contact

    Do not dispose of the unit with the usual ► transmission domestic refuse. The HCW 82/HCF 82 can send a test signal to the allocated Do not burn the product. ► receiver (for example an underfloor heating controller) in order to test the signal strength.
  • Seite 11: Mise En Service

    On peut ainsi couvrir une large gamme d'applications. 1.2. Différences HCW 82/HCF 82 ouche de Liaison En plus du HCF 82, le HCW 82 possède les fonctions suivantes: Figure 2: Polarité des piles et touche de Liaison • Possibilité de raccordement pour un bloc d'alimentation Mettez en place les piles Mignon fournies en respectant la externe (voir "Fonctionnement avec source de courant...
  • Seite 12: Liaison (Binding)

    Affectation au régulateur de zones trous de perçage suivant le schéma de Marquez les ► Pour affecter le HCW 82/HCF 82 à une plage de montage (voir Figure 3). température, suivez les instructions du chapitre "Mise en service" des instructions de montage "Régulateur de zones HCE 80/HCE 80R/HCC 80/HCC 80R".
  • Seite 13: Particularités Du Hcw 82

    Mettez le bloc d'alimentation hors tension. ► Sélectionnez avec la molette de réglage (1) (voir Figure 5) ► Enlevez le couvercle du boîtier du HCW 82 (voir Figure 1, ► le décalage de la température désirée (indications de Page 11).
  • Seite 14: Installer Le Contact De Fenêtre

    Aide en cas de problème Raccordez une sonde de détection avec contact libre de ► Problème Cause Solution potentiel au HCW 82 (installation au raccordement 1 et au raccordement 2, voir Figure 7 (2), Page 13). La liaison a Piles mal Replacer correctement ►...
  • Seite 15: Messa In Funzione

    1.2. Flessibilità HCW 82/HCF 82 Figura 2: Polarità delle pile e tasto Sync Oltre al HCF 82 il HCW 82 è dotato delle seguenti funzioni: Inserire le pile mignon comprese nella fornitura con la ► • Possibilità di collegamento di un cavo di rete esterno corretta polarità...
  • Seite 16: Sincronizzazione (Binding)

    Segnare i fori di perforazione secondo il relativo schema ► piani (vedere Figura 3). Per poter assegnare al HCW 82/HCF 82 una zona termica è necessario seguire le istruzioni riportate al capitolo "Messa in funzione" delle istruzioni di montaggio del "Regolatore di piani HCE 80/HCE 80R/HCC 80/HCC 80R".
  • Seite 17: Particolarità Hcw 82

    Particolarità HCW 82 corrente esterna 3.1. Funzionamento Il modulo HCW 82 oltre a poter essere alimentato a batteria è predisposto anche per il funzionamento alimentato da una La temperatura nominale dell’ambiente può essere fonte di corrente esterna. impostata facilmente con il modulo HCW 82 attraverso una rotella di regolazione.
  • Seite 18: Installazione Del Contatto A Finestra

    Sostituzione delle pile 3.4. Installazione del contatto a finestra Se si presentano problemi Collegare un sensore a scelta privo di contatto a HCW 82 ► Problema Causa Rimedio (installazione al collegamento 1 e collegamento 2, vedere Figura 7 (2), pagina 17).
  • Seite 19: Puesta En Marcha

    1.2. Diferenciación enter HCW 82/ Botón Bind HCF 82 A diferencia del HCF 82, el HCW 82 tiene las siguientes Figura 2: Polaridad de las pilas y botón Bind funciones: Ponga las pilas Mignon includidas con la polaridad ►...
  • Seite 20: Enlace (Binding)

    ► radiante diagrama de taladrado (véase Figura 3). Para asignar el HCW 82/HCF 82 a una zona de tempera- tura, lleve a cabo los puntos expuestos en el capítulo "Puesta en marcha" de las instrucciones de montaje "Controlador de suelo radiante HCE 80/HCE 80R/HCC 80/ HCC 80R".
  • Seite 21: Particularidades De Hcw 82

    Aisle el equipo de alimentación de red de la corriente. ► Figura 5: HCW 82 Quite la tapa de la caja del HCW 82 (véase Figura 1, ► página 19). Asigne con el mando (1) (véase Figura 5) el cambio ►...
  • Seite 22: Instalación Del Contacto De Ventana

    Instalación del contacto de ventana Ayuda en caso de Conecte un sensor con contacto libre de potencial al problemas ► HCW 82 (instalación en la conexión 1 y conexión 2, véase Figura 7 (2), página 21). Problema Causa Solución Para la puesta en marcha siga las instrucciones del ►...
  • Seite 23: Inbedrijfstelling

    Zo kan een breed spectrum van toepassingen worden afgedekt. 1.2. Verschillen HCW 82/HCF 82 De HCW 82 heeft ten opzichte van de HCF 82 de volgende Bind-knop aanvullende functies: • aansluitmogelijkheid voor een externe netvoeding Afbeelding 2: Polariteit van de batterijen en de Bind-knop (zie "Gebruik met externe voeding", pagina 25).
  • Seite 24: Verbinden (Binding)

    Teken de boorgaten af conform het boorsjabloon ► (zie Afbeelding 3). Om de HCW 82/HCF 82 als een temperatuurzone van de vloerverwarningsregelaar in te leren, volgt u de instructies uit het hoofdstuk "Inbedrijfstelling" van de montagehand- leiding "Etageregelaar HCE 80/HCE 80R/HCC 80/ HCC 80R".
  • Seite 25: Bijzonderheden Hcw 82

    Zorg voor een netvoeding met 3 VDC ± 10 %, 25 mA. ► Schakel de netvoeding spanningsloos. ► Verwijder het deksel van de behuizing van de HCW 82 (zie ► Afbeelding 5: HCW 82 Afbeelding 1, pagina 23). Selecteer met de instelknop (1) (zie Afbeelding 5) de ►...
  • Seite 26: Raamcontact Installeren

    3.4. Raamcontact installeren Storingen oplossen Sluit een willekeurige sensor met potentiaalvrij contact aan ► Storing Oorzaak Oplossing op de HCW 82 (aansluiting 1 en 2, zie Afbeelding 7 (2), pagina 25). Verbinden Batterijen Batterijen juist ► mislukt verkeerd Volg voor de inbedrijfstelling de instructies van het plaatsen.
  • Seite 27: Ibrugtagning

    1.2. Forskelle mellem HCW 82 og HCF 82 Tasten Bind HCW 82 har ud over samme funktioner som HCF 82 desuden følgende: Figur 2: Poling for batterier og tasten Bind • Mulighed for tilslutning af en ekstern strømforsyning Ilæg de medfølgende Mignon-batterier, og sørg for at de ►...
  • Seite 28: Oprettelse Af Forbindelse (Binding)

    2.1.1. Tilknytning til etageregulering Markér borehullerne efter boreskabelonen (se Figur 3). ► For at knytte HCW 82/HCF 82 til en temperaturzone skal du følge instruktionerne i kapitlet "Ibrugtagning" i monterings- vejledningen til "Etageregulering HCE 80/HCE 80R/HCC 80/ HCC 80R". 2.1.2.
  • Seite 29: Særlige Egenskaber Ved Hcw 82

    Sørg for at have en strømforsyning med 3 VDC ± 10%, ► min. 25 mA parat. Afbryd strømmen til strømforsyningen. ► Figur 5: HCW 82 Fjern kabinettet på HCW 82 (se Figur 1, side 27). ► Fjern batterierne. Vælg den ønskede ændring af den forudindstillede ► ►...
  • Seite 30: Installation Af En Rudekontakt

    Batteriskift 3.4. Installation af en rudekontakt Problemløsning Slut en vilkårlig føler med potentialfri kontakt til HCW 82 ► Problem Årsag Løsning (Installation til tilslutning 1 og tilslutning 2, se Figur 7 (2), side 29). Binding Batterierne er Læg batterierne ►...
  • Seite 32 Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative: Honeywell GmbH Böblinger Straße 17 71101 Schönaich, Germany Tel.: (++49) (0) 7031 637 01 Fax: (++49) (0) 7031 637 493 http://europe.hbc.honeywell.com...

Diese Anleitung auch für:

Hcf 82

Inhaltsverzeichnis