Philips FC8910 Bedienungsanleitung Seite 16

English
16
2 Take the HEPA 12 filter out of the appliance.
3 Rinse the pleated side of the HEPA 12 filter under a hot slow-
running tap.
- Hold the filter in such a way that the pleated side points upwards and
the water flows parallel to the pleats. Hold the filter at an angle so that
the water washes away the dirt inside the pleats.
- Turn the filter 180° and let the water flow along the pleats in opposite
direction.
- Continue this process until the filter is clean.
Never clean the washable filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
4 Carefully shake the water from the surface of the filter. Let the filter
dry at least 2 hours before you put it back into the vacuum cleaner.
Note: Make sure that the filter is completely dry before you put it back into
the appliance.
5 Put the filter back into the appliance.
Note: Make sure that the two lugs of the HEPA filter point downwards.