Olympus FL-900R Bedienungsanleitung Seite 33

Using the Bounce Adapter Using the Bounce Adapter
Attaching the supplied bounce adapter diffuses the light from the fl ash over a
wider area for softer bounce lighting.
• Insert the tabs on the interior of the bounce adapter into the matching slots on
top of the fl ash and attach the adapter as shown.
• Attaching the adapter reduces fl ash output.
• To remove the adapter, pull the tab on the bottom toward you
as shown.
Using the IR Filter Using the IR Filter
Attach the IR fi lter when using the fl ash to control other units in RC mode.
• Insert the tabs on the interior of the IR fi lter into the matching slots on top of the
fl ash and attach the fi lter as shown.
• To remove the fi lter, pull the tab on the bottom toward you as
shown.
1
2
1
2
33
EN