Connecting External Data Media - Grundig 26 VLE 8200 SL Bedienungsanleitung

USB OPERATION
Connecting external
data media
Before connecting the data medium, switch the
television to standby using »
device and then switch the television on again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
The »USB1« socket of the television set
7
supplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
(HDD)« of the television set.
»USB2
If you use a network cable for external hard
7
disks which are connected to the
(HDD)« socket on the television, this net-
work cable must also be disconnected from
the power supply when the television is
switched off.
External data media may not be disconnect-
7
ed from the television set while files on the
data medium are being accessed.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
USB transfer is not in itself an operating
7
mode. It is only an additional function.
46
ENGLISH
---------------------------------------------------------------------------------------------------------------
8 «. Connect the
»USB2
1 Connect the »USB2
television and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using a
USB cable;
or
insert the USB plug of the USB memory stick
into the »USB1« socket of the television set.
2
Confirm the display »
(green).
– The file browser appears.
(HDD)« socket of the
« with » «