Tuning Analogue Television Channels - Grundig 26 VLE 8200 SL Bedienungsanleitung

SPECIAL SETTINGS
Tuning analogue television
channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channels can be set directly or
using the scan.
Switching the television to
analogue reception
Note:
Analogue channels can be selected if the
7
option »Air« or »Cable« has been selected.
1
Open the »Select input source« menu with
» «.
2
Depending on the antenna system, select the
option »Air« or »Cable« with »
>
or » « as the input source and press »OK«
to confirm.
Note:
Additional operations are explained in the
7
following sections.
Setting all analogue television
channels
Analogue channels are displayed in the channel
list after the digital channels.
Note:
Plug the rooftop antenna cable (for analogue
7
television channels) into the
socket on the television.
1 Open the menu with »MENU«.
2
Select the line »SOURCE SETUP« with »
or » « and press »OK« to confirm.
Λ
– The »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »OK« to confirm.
Select the option »Air« or »Cable« with »
>
» «, » « or »
V Λ
firm.
----------------------------------------------------------------------------------------------------------
«, » «, »
V Λ
»ANT
« or »
V
« and press »OK« to con-
4 Select the line »Automatic Channel Search«
with » « or »
V
firm.
Source
Automativ Channel Search
Digital Manual Tuning
Analogue Manual Tuning
Program Table
Signal Information
Automatic Service Update
CA -­ Modul
Active Antenna Power
<
«
5
Select the line »Scan Typ« with »
and set the option »ATV« with »
6
Start the scan with » « (red).
Note:
After starting the scan, a security query will
7
appear. Press » « (green) to confirm the
option »Yes«.
– All channel and favourites lists for the ana-
logue channels will be deleted and com-
IN«
piled anew.
– The »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
«
V
this can easily take a few minutes.
– The search is complete as soon as the »PRO-
GRAM TABLE« appears.
«
Λ
Note:
You can abort the search by pressing
7
<
«,
»MENU«.
7 Press »MENU« to end the setting.
« and press »OK« to con-
Λ
SOURECE SETUP
Air
On
Not inserted
Off
Exit
Back
« or »
V
<
« or »
ENGLISH
20.09.2010
15:46
OK
«
Λ
>
«.
73