Grundig 26 VLE 8200 SL Bedienungsanleitung Seite 16

SETTINGS
6 Select the line »DISEqC Mode« with »
or » «.
Λ
Select »DiSEqC 1.0« or »DiSEqC 1.1« in
accordance with the existing antenna system
< >
with » « or » «.
– DiSEqC 1.0 allows up to four satellites to
be received simultaneously.
– DiSEqC 1.1 allows up to 16 satellites to be
received simultaneously.
7
Select the line »LNB Selection« with »
» «.
Λ
Select the setting for the respective satellites
< >
with » « or » «.
8
Once the settings for the satellite have been
made, switch to the »AUTOMATIC CHAN-
NEL SEARCH« menu with » « (red).
SOURCE SETUP
AUTOMATIC CHANNEL SEARCH
Connection Type
Select Satellite
Scan Mode
Service Type
Network Search
Exit
Back
9
Select the line »Scan Mode« with »
or » «.
Λ
Select the scan mode with »
(for unencrypted channels, for encrypted
channels only, or for both).
10 Select the line »Service Type« with »
or » «.
Λ
< >
Use » « or »
want to search for television channels only
(TV), radio stations only (Radio) or both
(Radio + TV).
16
ENGLISH
-----------------------------------------------------------------------------------------------------------------------------------------
V
20.09.2010
Satellite
ASTRA 2A , E
Free + Scramble
All
Off
Start Search
<
« or »
« to select whether you
« 11 Start the scan with » « (red).
V
– The »Results« menu appears, and the scan
for TV channels begins.
– Depending on the number of television
channels received, this can easily take a
few minutes.
– The scan is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
« or
You can abort the scan by pressing
7
»MENU«.
12
Press »MENU« to end the setting.
Note:
If other television channels are to be tuned
7
from a second satellite, proceed as follows:
Open the menu with »MENU«, select the
line »SOURCE SETUP« with »
15:46
and press »OK« to confirm. Then select the
»Automatic Channel Search« with »
» « and press »OK« to confirm. Confirm
Λ
the line »Select Satellite« with »OK« and
select the preferred satellite with »
<
» « or »
Continue the adjustment by step
chapter.
Note:
Before recording HD channels, please
7
check signal quality and Strength, see
chapter "Displaying signal information" on
page 76. If the level is displayed in green,
you can record HD channels without any
problems.
«
V
>
«
«
V
>
«. Start the scan with » « (red).
« or » «
V Λ
« or
V
«, » «,
V Λ
7
of the