Device Operation - Grundig 26 VLE 8200 SL Bedienungsanleitung

OPERATION USING EXTERNAL DEVICES

Device operation

You can decide whether external devices should
react to your television's remote control.
1
Press » «, use »
select the preset »HDMI1« to »HDMI4« and
press »OK« to confirm.
2 Open the menu with »MENU«.
3
Select the menu item »SOURCE SETUP« with
» « or » « and press »OK« to confirm.
V Λ
– The »SOURCE SETUP« menu appears.
SOURCE SETUP
Source
DIGILINK
Device Selection
Remote Control
Device Standby
Exit
Back
4
Select the line »Remote Control« with »
or » «.
Λ
5
Select the type of operation (»RC Pass-
through«, »Deck« or »Tuner« with »
>
» «.
Notes:
»RC Passthrough« can be used for all devices.
7
»Deck« and »Tuner« can be selected in ac-
cordance with the external device which
has been connected.
Try out which type of remote control opera-
7
tion the external device reacts to the best.
Read about the scope of functions of the
7
DIGILINK-compatible device in the respec-
tive operating manual.
6
Press »MENU« to end the setting.
58
ENGLISH
< >
«, » «, » « or » « to
V Λ
20.09.2010
15:46
HDMI1
GRUNDIG DVD
RC Passthrough
<
« or
Switching the device to standby
This option switches the external device to
standby.
1
Press »
select the preset »HDMI1« to »HDMI4« and
press »OK« to confirm.
2
Open the menu with »MENU«.
3
Select the menu item »SOURCE SETUP« with
» « or »
V Λ
– The »SOURCE SETUP« menu appears.
4 Select »Device Standby« with »
and press »OK« to confirm.
– The external device switches itself off.
«
V
-----------------------------
<
«, use » «, » «, »
V Λ
« and press »OK« to confirm.
V
>
« or » « to
« or » «
Λ