Product Description And Intended Use; Product Installation - Nice To-Max T Installierungs-Und Gebrauchsanleitungen Und Hinweise

vices. Keep all portable control devices (remote con-
trols) out of the reach of children.
• During a manoeuvre, check the automation and keep
all persons at a safe distance until the movement has
been completed.
• Never activate the awning if maintenance work is
being performed (e.g. an adjacent window is being
cleaned). If the control device is automatic, discon-
nect the awning from the power supply.
• Always remember to frequently check the balancing
springs and cable wear (if these mechanisms are
present). Do not use the automation if adjustments or
repairs are required. In this case always contact a
specialised technician to solve the problem.
2 – English
PRODUCT DESCRIPTION AND
2
INTENDED USE
To-Max T is a tubular motor destined exclusively for the
automation of various types of awning (see fig. 3). Any
other use is strictly prohibited! The manufacturer
declines all liability for damage resulting from im -
proper use of the product and other than as speci-
fied in this manual.
Product functional specifications:
- powered via the electrical mains at 230 V;
- installed inside the awning winder roller, the protrud-
ing face is fixed by means of the special Nice screws
and/or support brackets (not supplied in the pack).
- designed to move the awning up and down;
- supplied with built-in control unit with encoder tech-
nology to guarantee electronic control of movement
and limiter precision;
- programmed by means of a wall-mounted pushbut-
ton panel or a TTU programmer (accessories not
supplied in pack);
- controlled via cable, by means of a wall-mounted
pushbutton panel (accessory not supplied in pack);
- fitted with a thermal cut-out which, in the event of
overheating due to use of the automation in excess
of the set limits, automatically shuts off the power
supply and only restores operation when the temper-
ature returns within the normal range.
3

PRODUCT INSTALLATION

3.1 - Preliminary checks – Application limits
Caution! - Before proceeding with installation, che -
ck the condition of the product components, suit-
ability of the selected model and conditions of the
intended installation environment.
• Compare the rated technical specifications of this
motor with those of your awning; DO NOT install the
motor if its technical specifications (nominal tor -
que, rotation speed and operation time) are not
suitable for the control of awning movements. In
particular, the motor torque MUST NEVER EX -
CEED that required to move the awning. Further
application limits are stated in the chapter "Technical
Specifications".
• Before automating a sun awning, ensure that there is
sufficient space in front of the awning to enable total
opening as envisaged.
• Protect the motor against atmospheric agents.
3
?
?