Residual Heat; Daily Use; Automatic Switch-Off; Language Selection - AEG HK884406XG Benutzerinformation

www.aeg.com
8
The cooking zone in
the display
?
A

3.4 Residual heat

WARNING!
After, a cooking session the
cooking zone stay hot. The risk of
burns!

4. DAILY USE

4.1 Activation and
deactivation
Touch
activate the appliance.
4.2 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). The
sound operates some time and the
appliance deactivates. Remove the
object or clean the control panel.
• The appliance gets too hot (e.g. when,
a saucepan boils dry). Before you use
the hob again, the cooking zone must
be cool.
• You use incorrect cookware. The sym-
bol ? comes on and the cooking zone
deactivates automatically after 2 mi-
nutes.
There is no cookware on the cooking zone.
The Automatic Heat Up function operates.
OptiHeat Control. The cooking zone is off. The Di-
mension and colours show the residual heat:
• Big red - still cooking
• Big bright red - keep warm
• Small bright red - still hot
• Small white - the cooking zone is cold
for 1 second to activate or de-
Description
The induction cooking zones make the
heat necessary for cooking directly in the
bottom of the cookware. The glass ce-
ramic is hot from the heat of the cook-
ware.
• You do not deactivate a cooking zone
or change the heat setting. After some
time, the appliance deactivates. See
the table.
• The relation between heat setting and
times of the Automatic Switch Off
function:
– 1 — 3 — 6 hours
– 4 — 7 — 5 hours
– 8 — 9 — 4 hours
– 10 — 14 — 1.5 hours

4.3 Language selection

To change the language, start the appli-
ance with and than touch OK. Set the
language menu with arrows. Touch OK
to confirm. The display shows the list of
languages. Touch
language. Touch OK to confirm.

4.4 The heat setting

Touch the control bar at the heat set-
ting. Move your finger along the control
bar to change the setting. Do not re-
lease before you have a correct heat set-
ting.
or to set the