Klarstein 10032777 Bedienungsanleitung Seite 14

EN
14
Display
weniger
"-"key
Timer
Timing key
Schwenk
Sway key
Key Function Description
On the idle mode, press on-off key to enter the power-on
Ein/Aus
mode, the warmer starts working and the whole machine
runs under the previous remembered mode and tempera-
ture. On the power-on mode, press on-off key to enter the
idle mode, the warmer stops working. (Note: On the heat-
ing mode, draught fan will operate for 15 seconds at low
wind speed after power off.).
After power-on, the warmer is in the intelligent mode by de-
Heizstufe
fault. Repeatedly press the "mode key", the warmer shifts in
circular order among "intelligent mode, low warm wind, high
warm wind, strong warm wind, breeze, and gentle breeze.
+ und - On the working state, press "+" or "-" keys to set the work-
ing temperature. The temperature setting range is 5 °C - 35 °C
and every temperature value is of 1 °C difference. The machine
confirms and displays the set temperature value if without opera-
tion within 3 seconds after the setting. After room temperature
reaches the set temperature, display screen blinks for 10 seconds
and heating unit stops working; when temperature is below the
set temperature, machine restarts to heat. In low warm wind,
high warm wind, and strong warm wind modes, it can be set
to without temperature control, whose display icon is "--".
mehr
"+"key
ein/aus
On-off key
Modus
Mode key
Display screen
Anzeige