Assembling And Adjustments; General; Handle - Husqvarna LC 348V Bedienungsanweisung

ASSEMBLING AND ADJUSTMENTS

General

IMPORTANT! Prevent unintentional starting
!
by removing the ignition cable from the
spark plug.

Handle

Assembly
• Loosen the lower knobs.
• Adjust the hight of the handle and tighten the knobs
securely.
Assembly of the catcher
• Hook the upper cover on the attachments on the lower
cover.
• Lower the upper cover. Make sure the edge strip is placed
on the outside of the lower cover.
• Start by hooking the end of the metal ledge into the slots
of the lower cover.
• Guide the metal ledge around both the upper and lower
cover. Fasten the metal ledge on the lower cover.
• Lift the hind shield and suspend the grass container.
– 71
English