Before First Use; Operation - Klarstein CoolZone 10033086 Bedienungsanleitung

BEFORE FIRST USE

• Before use, remove all packing materials, including bottom cushions, foam pads
and tapes inside of the refrigerator; tear off the protective film on the doors and the
refrigerator body.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or
watery places to prevent rust or reduction of insulating effect.
• Do not spray or wash the refrigerator; do not put the refrigerator in moist places
easy to be splashed with water so as not to affect the electrical insulation properties
of the refrigerator.
• The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat,
and sturdy (rotate left or right to adjust the wheel for levelling if unstable).
• The top space of the refrigerator shall be greater than 30 cm, and The refrigerator
should be placed against a wall with a free distance more than 10 cm to facilitate
heat dissipation.
• Before initial start, keep the refrigerator still for half an hour before connecting it to
power supply.
• Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3
hours, or for above 4 hours in summer when the ambient temperature is high.
• Spare enough space for convenient opening of the doors and drawers.

OPERATION

Control Panel
Temperature setting button of refrigerator compartment:
(1) Setting 1: 8°C
(2) Setting 2: 6°C
(3) Setting 3: 4°C
(4) Setting 4: 2°C
Once initially powered on,the display screen is on full display for 3 seconds.
and then the refrigerator runs according to setting 3. In case of no failures, it shows the
actual temperature setting of refrigerator.
EN
41