Niceboy PILOT Q3 Anleitung Seite 11

6. Playback mode – By pressing it shortly with the camcorder on you will enter the mode
for playback of the videos recorded and viewing the photographs.
7. Emergency recording – By pressing it shortly while a video is being recorded you'll
activate/deactivate the emergency recording. With the function activated the camcorder
will lock the current video against unwanted erasure. Such video shall not be erased
even when the card becomes full.
8. Turning on/off/screen saver – The camcorder will automatically start up whenever
the power is connected and turn off whenever disconnected from power. You can start
up the camcorder by long pressing the button. You'll turn off the camcorder in the
same way.
By pressing it shortly with the camcorder on you'll activate/deactivate the display screen.
9. Holder port – Used to fasten the holder to glass.
10. HDMI – Used to connect the camcorder with TV-set or monitor.
11. USB – Used to connect the miniUSB to power.
12. Microphone – Used to record sound around the camcorder.
13. Reset – Restarts the camcorder if necessary.
14. LED – Indicative LED.
15. Display – 3" camera display screen.
16. Lens – Used to capture videos and photographs.
SETTINGS IN MENU
Delayed turn-off: Setting of the camcorder delayed turn-off time. With the function
deactivated the camcorder turn off once disconnected from power. With a time set, the
camcorder will turn off automatically only after the time elapses.
Video loop: Setting of the video loop, i.e. the spans of time in which the videos will be
recorded. With the card's capacity run out, the oldest records will start being rewritten
(except for the locked videos taken in the emergency recording mode).
Video resolution: Resolution of the video being recorded can be set here.
Audio recording: Activates/deactivates recording of the sounds around the camcorder.
EN
11