Hitachi CP-WX625 Bedienungsanleitung Seite 139

Command Control via the Network (continued)
Decreasing the projector setting value (Decrement command)
Header + Command data ('05H' + '00H' + type (2 bytes) + '00H' + '00H')
'06H'
When the projector cannot understand the received command
'15H'
'15H'
When the projector cannot execute the received command.
'1CH' +
'xxxxH'
When authentication error occurred.
'1FH' + '0400H' is sent
NOTE
[TCP #9715]
1. Protocol
2. Header
3. Data Length
4. Command data
5. Check Sum
6. Connection ID
11