Filing the Water Tank
• Remove the top cover of the water tank.
• Fill up the tank with water.
• Mount back the top cover of the water tank
Attention
• Do not use the water dispenser anything except water.
• If you leave water in the tank for a long time it could cause odour. In this case clean
the tank and keep using it.
• Clean up the water tank before using it for the first time.
&OHDQLQJ WKH :DWHU 7DQN
• Lift the water tank.
• Remove the tank cover with upholding the side locking covers
• Clean up the tank with warm water and reassamble the pieces you removed.
Stowing the Water Tank
• Install the water tank as shown.
• Be careful about the tap and the hole match each other while installing.
• Water flow can appear unwillingly if the tank haven't taken its place properly. Also
check the gaskets are assembled properly.
Drip Tray
• During the usage of dispenser the water splashes around the glass piles up in the
drip tray. In order to clean it remove the tray. After the cleaning you can mount it on.
Filter detail.
There is a filter cover with a filter in it at the back of
top cover .Don't use
this related cover.
Please apply to authorized service about
exchanging of related detail.
Please apply to authorized service center about
opening of related cover and exchanging of filter
ATTENTION:
PLEASE HOLD THE GLASS FOR ONE SECOND LONGER AFTER DISTRIBUTION TO AVOID
DRIPS.
UK - 13 -