Description (Fig. A); Assembly And Adjustment - DeWalt DE0842 Bedienungsanleitung

E N G L I S H

Description (fig. A)

Your DE0842 pole has been designed to extend the
capabilities of your D WALT DW082K/DW084K/
E
DW087K laser.
1 Tube
2 Table
3 Tool mounting hole
4 End piece
5 Table clamp handle
6 Telescopic shaft
7 Foot

Assembly and adjustment

Also refer to the manual of the tool to be
used with this attachment.
Installing the attachment (fig. B - D)
Fully assembled, the pole consists of 5 tubes.
• Hold the tube (1) with the telescopic shaft (6) with
one hand and with the other fit a tube into the
threaded end (8).
• Fit as many tubes as required to approach the
desired height.
• Loosen the clamp handle (5).
• Slide the table (2) onto the pole.
• Push the handle (5) down to lock the table in
position.
• Fit the tube with the end piece (4).
• Clamp the attachment in position.
• Fit the tool onto the table (2).
Clamping the attachment in position (fig. E)
The telescopic shaft (6) allows you to adjust the
attachment to the required clamping height.
• Loosen the collar (9).
• Fold out the feet (7).
• Carefully slide the attachment in upright position
with the feet placed on the floor.
• Slide out the shaft as required.
• Tighten the shaft to lock it into place.
• Make sure the attachment is securely clamped.
• Check if the attachment is level.
14
Mounting the tool to the attachment (fig. C)
The table (2) has been equipped with a threaded pin
(3) for mounting of the DW082K/DW084K/DW087K
laser.
• Install the attachment on a relatively smooth and
level location.
• Fit the tool to the table by inserting the threaded
pin (3) into the receptacle in the tool and
tightening the knob (11).
• Adjust the table height as necessary.
Before mounting the tool to the
attachment check that the attachment is
firmly set and is wobble free.
Adjusting the table height (fig. C)
• Loosen the height adjustment handle (5).
• Move the table (2) as necessary.
• Push the handle (5) down to lock the table in
position.
Transport and storage
In order to conveniently transport and store the
attachment, a carrying bag is included.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your attachment has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.