Assembly; Component Positions - Nibe ELK 15 Installateurhandbuch

Assembly

The electric heater must be installed upright (see image
below).
Free space of 500 mm is required in front of the water
heater for service. If this is not possible, detachable con-
nections must be used.
16

Component positions

Component list
EB1 Immersion heater
FD1 Overheat protection
X1 Terminal block
QA1 Contactor 5,0 kW (-K1)
QA2 Contactor 10,0 kW (-K2)
BT30 Emergency mode thermostat
XL1 Connection supply line, G 32
XL2 Connection return line, G 32
UB1, UB2 Cable gland
QM60 Venting
PF1 Rating plate
QM60
XL1
EB1
XL2
UB1
UB2
FD1
BT30
QA1
QA2
X1
PF1
ELK 15 | GB