Special; Exit - Santec VTC-HDH444IRPWDU Bedienungsanleitung

Bedienungsanleitung / User manual
VTC-HDH444IRPWDU

5.9 Special


Language:
Select the OSD menu language.
The default language is German.

Title:
Define whether the camera title/name should be displayed in the picture or not.

Communication:
Used to configure the RS-485 port.
o ID:
Set the ID for the RS-485 port (0 – 255).
If several cameras are connected in the same RS-485 branch, every camera
has to have its own camera ID.
o Baud Rate (default: 9600):
Define the Baud rate for the RS-485 port (2400 – 9600).
o Protocol:
By default, Pelco D is supported.

DPC (Dead Pixel Compensation):
If enabled, the camera runs a dead pixel compensation procedure.

Factory set:
If enabled, all adjustments are reset to factory default settings.

5.10 Exit


Save & Exit:
Exit the OSD menu while the settings are saved.

Exit:
Exit the OSD menu without saving the settings.
_________________________________________________________________________________
- 45 -