Klarstein 10010174 Bedienungsanleitung Seite 13

1. Buy one standard 5 liter party keg.
Attention: only use 5L beer keg stoppers in below:
only use 5L beer keg stoppers in below:
Note:
If the keg has been shaken (transport, etc.), the beer must be allowed to stand for a suffi cient time prior
to use.
2. Cool the 5 liter party keg prior to use. The optimal drinking temperature is about 6-8℃. The beer
from a warmer keg is less refreshing. Heavy foaming can also result. To cool the keg in the beer
dispenser, it is recommended to place it in the connected dispenser the day before. At a keg
temperature of about 23℃, it is recommended to wait 16 hours before pulling the fi rst glasses of beer.
Note: The cooling time in the refrigerator is between 6 and 12 hours depending on the brand and capac-
ity due to the sophisticated cooling technology. This allows the cooling to process to be accelerated. Stor-
ing the 5 liter party keg in a refrigerator off ers the advantage of always having a second keg ready to use. ing the 5 liter party keg in a refrigerator off ers the advantage of always having a second keg ready to use.
Attention: Never cool the party keg in a freezer as it can burst. Shock cool- Never cool the party keg in a freezer as it can burst. Shock cool-
ing can impair the quality of beer.
3. No matter what stopper you choose for 5 liter keg, it is necessary 3. No matter what stopper you choose for 5 liter keg, it is necessary
to use the supplied tools for removing the stopper.
4. Note: Before removing the stopper, always fi rst vent the keg as stated on the keg and allow Before removing the stopper, always fi rst vent the keg as stated on the keg and allow
standing for a suffi cient period so that the foam does not escape from the vent opening. standing for a suffi cient period so that the foam does not escape from the vent opening.
5. Once the stopper has been removed, the supplied universal beer keg stoppers can be inserted
into the bunghole in the keg.
Note:
Do not dispose of the universal beer keg stoppers after emptying the keg, but remove and clean with
warm water and a small amount of mild washing up liquid and retain for reuse. Remove the beer keg
stoppers by gripping the edge of the rubber ring and pulling fi rmly with the other hand to ensure that it
does not tip over.
6. Subsequently place it vertically on the tap opening of the stopper
and push it downwards fi rmly and evenly into the keg. First attach
the dispensing unit to the back of the keg. Push down on the front
of the unit until it clicks in place. The dispensing unit is now ready to
use.
Attention: Before using the 5 liter party keg, always check the best
before date!
Attention: Ensure that the keg lid is not dented so that the clamps of
the dispensing unit can grip under the edge of the lid.
13
Preparation