Klarstein 10010174 Bedienungsanleitung Seite 14

7. Open the dispenser lid by pressing the lid open button.
8. Lift the dispenser unit (including keg) into the cooling chamber of the dispenser.
9. Attach the end of the dispensing unit to the gas outlet valve.
Attention: Never fi ll liquid into
the gas outlet valve.
10. Close the dispenser lid so that it locks with a click.
11. Turn pump regulator to „ON" position, you will hear the voice of working pump, and the pump
will automatically shut down when the beer barrel pressure is enough. will automatically shut down when the beer barrel pressure is enough.
12. Pull the tap towards you
standing, than you can
taste fresh beer.
Warning: If there is enough pressure in the keg or pressure regulator is closed, the air pump cannot
work, if there is no enough pressure in the beer keg, open the pressure regulator, the air pump will work
automatically.
If you choose the Heineken keg, as it has pressure, must do as follows:
1. Attach the photo, install the supplied adapter on the keg; 1. Attach the photo, install the supplied adapter on the keg;
OFF OFF ON ON ON ON
14