Connection - Atag WO6011MR Bedienungsanleitung

INSTALLATION

Connection

Electrical connection
This is an insulation class II (double insulated) appliance. The cable
does not need to be connected to an earthed socket.
Check whether the voltage mentioned on the type plate corresponds
with the voltage of the domestic electric installation.
Connection to the mains power should be as follows:
BROWN= L phase
BLUE = N phase.
Each cooker hood is equipped with a connection plug. Mount the
cooker hood so that the plug can be reached.
Please note:
If you want to make a fixed connection, make sure that an omnipolar
switch with a contact separation of at least 3 mm is fitted in the supply
line.
EN 12