Program Mode - auna 10022749 Bedienungsanleitung

Note:
1. The main unit can play MP3 and WMA only in this mode.
2. This unit can support most of USB devices and SD/SDHC cards (up-to 32GB memory capacity for
SDHC). It cannot access (or, need longer time to access) those devices with big memory capacity.
3. It can support USB version 1.1 and 2.0.
4. The main unit does not support the WMA file which is protected "DRM FILE".
Playing The Entire flash disc
1. To interrupt playback, press the PLAY/PAUSE button. The time elapsed indicator will flash.
2. To resume playback, press the PLAY/PAUSE button again.
3. To stop playback, press the STOP button.
Note:
In any time, the USB DEVICE or SD CARD must be fixed well under in the STANDBY mode to avoid
the main unit and USB DEVICE or SD CARD were damaged.
REPEAT PLAY (on the remote control)
CD
1. Press the REPEAT button once , REPEAT is displayed. The main unit will play the current track
repeatedly.
2. Press the REPEAT button twice, REPEAT ALL is displayed. The main unit will play all tracks repeatedly.
3. Press the REPEAT button thrice, REPEAT function will be off.
MP3/WMA
1. Press the REPEAT button once , then REPEAT is displayed. It will play the current track repeatedly.
2. Press the REPEAT button twice, REPEAT ALL is displayed. It will play all tracks repeatedly.
3. Press the REPEAT button thrice, then REPEAT ALBUM is displayed. It will play repeatedly the
current album.
4. Press the REPEAT button four times, then REPEAT function will be off.
RANDOM PLAY(on the remote control)
1. Press the RANDOM button once , and then RANDOM is displayed.
2. Press the RANDOM button once again, and then resume to normally play.
INTRO PLAY(on the remote control)
1. Press the INTRO button once, and then INTRO is displayed. The main unit will play the first 10
seconds of each track.
2. Press the INTRO button twice, and then resume to normal play.

PROGRAM MODE

User can make the program up to 32 tracks in CD mode or 64 tracks in MP3/WMA/USB/SD CARD
mode in any desired order. Program mode is activated while in stop mode.
1. How to play the program
CD
1. Press the MEMORY button, shift to PROGRAM mode.(F1)
2. Press the SKIP/TUNER SEARCH(UP or DOWN) button, the track number will be changed.
3. Press the MEMORY button to confirm the track number.
MP3/WMA/USB/SD CARD
1. Press the MEMORY button, shift to PROGRAM mode. The album number is flashing. (F2)
2. Press the PRESET/FOLDER (UP or DOWN) button, the album number will be changed.
3. Press the MEMORY button , the track number is flashing.(F3)
18