Program Play - auna 10022749 Bedienungsanleitung

4. Press the SKIP/TUNER SEARCH button, the track number will be changed.
5. Press the MEMORY button to confi rm the track number.
2.

PROGRAM PLAY

Press the PLAY/PAUSE button on the unit (or remote control), it will be play starting with the fi rst
track of the program. When all tracks have been played, the unit display will show the number of
tracks and the playing time of the CD/MP3/WMA tracks.
3. CANCEL PROGRAM
1. Press the STOP/MENU button once, or open the CD tray door and close it again then the memory
will be erased.
2. Set a new program, the existing one will be cleared.
Note : During in the program mode.
1. Press the „REPEAT" button once, the „REPEAT" indicator will light on the display. Then the main
unit will repeat the current track.
2. Press the „REPEAT" button twice, the „REPEAT ALL" will light on the display. Then the main unit
will repeat all the total number of tracks.
3. Press the „REPEAT" button once more again. The main unit will return to play the program normally.
AUX IN PLAY
The AUX input is located on the left hand side of the unit. Use a 3.5mm stereo jack cable to connect
audio equipment through the LINE IN jack.
1. To select the AUX input function, repeatedly press the MODE button on the unit (or remote
control) until the AUX is indicated on the display.
2. Press the VOLUME (+ or -) button to adjust the sound output level.
Note:
1. LINE in cable not included.
2. During in Aux mode, whether there is signal or not, the main unit will be switched to Standby
mode automatically after 4 hours which convert to Aux mode start the timer. In the 10 minutes
before the unit switched to Standby mode, the display will show "Auto OFF" and fl ash. Press the
"INTRO" button to resume playback, time for 4 hours again.
MUTE SETTING (on the remote control)
1. When you press the MUTE button once on the remote control, the volume level will fl ash and the
audio output will be temporarily terminated.(F4)
2. Press the MUTE button again, the volume level and the audio output will return to normal.
LISTEN TO THE MUSIC BY USING HEADPHONE
Plug your headphones (3.5mm mini-stereo plug) into the headphones jack on the left penal of the
unit. The sound will be heard through the headphones, not the speaker.
19