Cleco 936491PT Bedienungsanleitung Seite 18

1
Safety
1.2 Basic requirements for safe working practices
Before using the charger for the first time, ensure that you have carefully read and understood the instruc-
tion manual. Failure to observe the instructions below may result in electric shock, fire and serious injuries.
CAUTION!
Electrical safety
Do not open the charger.

Do not modify the charger structurally.

Operate the charger in dry, enclosed rooms only.

Protect the charger from moisture and rain.

Never operate the charger under unsuitable ambient conditions (i.e. where combustible gases,

solvents, dust, vapors or moisture is present).
Do not operate the charger if the housing or power plug are damaged.

Do not charge batteries without supervising them.

Do not use damaged batteries.

Work area
Ensure that there is enough space in the work area.

Keep the work area clean and dry.

1.3 Designated use
• This charger is intended exclusively for charging Cleco lithium ion batteries order no. 936400PT, order
no. 935377.
• Do not use it in areas where there is a risk of explosion.
1.4 Items supplied
Check shipment for transit damage and ensure that all items have been supplied:
1 Battery charger
1 EU power cable
1 NA power cable
1 GB power cable
1 Instruction Manual
1.5 Transport
Transport and store the charger in the original packaging. The packaging can be recycled.
1.6 Storage
Storage temperature
Relative humidity
18
EN
-20 °C to +60 °C (-4 °F to +140 °F)
0 to 80 %, non-condensing
P2069BA/INT 2014-06
69b_1_5 en.fm, 16.03.2015