Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Changes to products supplied as standard for your IMPRESSA C70 One Touch
Fine foam frother
Deviations from instructions
for use
Dismantling and rinsing the
fine foam frother
Changes to products supplied as standard for your IMPRESSA C70 One Touch
J
The instructions for use enclosed for the IMPRESSA C9 One Touch
also apply to your IMPRESSA C70 One Touch.
Your IMPRESSA is fitted with the fine foam frother as standard. The
new, innovative fine foam technology delivers fine milk foam with a
long-lasting consistency.
The illustrations in the instructions for use show the Easy Cappuc-
cino Frother. However, the descriptions also apply to the fine foam
frother.
To make sure the fine foam frother works properly, and in the inter-
ests of hygiene, it must be dismantled and rinsed daily if you have
been preparing milk. Your IMPRESSA will not prompt you to disman-
tle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the fine foam frother from the Connector
System
by twisting slightly.
©
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts of the fine foam frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in JURA Cappuccino
Cleaner and then rinse them thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector Sys-
tem
.
©
de
en
fr
it
nl
es
pt
sv
ru
3
Werbung
