Care And Maintenance - Chicco Lulla Go Gebrauchsanleitung

OPENING THE PRODUCT
ce
1. Remove the frame from the bag and
er
erect it following the direction of the ar-
m.
rows (Diag. 1). You will hear a double CLICK
to
when the frame has been opened and
locked in place correctly (Diag. 1A).
nt
2. Assemble the 4 legs following the direc-
tion of the arrows (Diag. 2) until they CLICK
ot
into place (Diag. 2A).
3. Place the mattress on the bottom of the
a
crib (Diag. 3).
y,
CLOSING THE PRODUCT
4. Remove the mattress (Diag.4).
he
5. Press the buttons on all 4 legs (Diag. 5)
d;
and slide them out in the direction of the
e.
arrows (Diag. 5A).
es
6. Then press the two buttons on the upper
d.
edge of the crib (Diag. 6) and fold the frame
d-
in the direction of the arrows. (Diag. 6A)
he
7. Place all the components inside the prac-
tical carry bag (Diag. 6B – Diag. 6C) and zip
he
it closed.
of

CARE AND MAINTENANCE

The crib and mattress have hard-wearing
n-
fabric covers that are completely remov-
able and washable. The covers must be
ne
removed/replaced by adults only. Check
the product regularly for signs of wear and
ce
damage and to ensure that it is assembled
correctly. Should any part be damaged, do
m
not use it and keep it out of reach of chil-
he
dren. Please refer to the care label for in-
ns
structions on how to wash the fabrics. Do
ke
not clean the product with solvents, abra-
a-
sive or harsh products.
ds
in
Hand wash in cold water
ly
Do not bleach
an
Do not spin-dry
f-
a-
Do not iron
he
he
Do not dry clean
Check that the fabric and stitching are in
good condition each time you wash it.
WARNING: When removing and/or replac-
ing the cover, handle the fabric with care to
prevent accidentally spoiling or damaging
it.
WARNING: It could take a few minutes to
remove and replace the fabric cover; this
operation must be performed by adults
only.
REMOVABLE COVERS
8. Remove the mattress.
9. To remove the cover, undo the four zips
along the top edges of the crib (Diag. 7) and
carefully remove the frame.
10. To remove the mattress cover, undo the
two zips on the mattress base (Diag. 7A)
and carefully remove the base and padding.
11. Follow the previous instructions in re-
verse order to replace the covers.
13