Salda Stouch Bedienungsanleitung Seite 34

EN
Description
Stouch controller is specially designed for control of:
• SALDA recuperation systems for units when automatic control is used with PRV_V2
• SALDA air supply, exhaust units when automatic control is used with ECO_v107 controller;
• SALDA fans with EC motors³;;
• Devices which are controlled using Modbus protocol.
Units: RIS/RIRS 3.0; RIS/RIRS EKO 3.0
1
Units: RIRS 200 VER EKO; RIRS 300 VE... EKO
2
Using the remote controller "Stouch" for "ECO" fans' control it is necessary to use additional power supply and to
3
provide the protection against overloads and/or short circuits.
NOTE: Remote controllers don't control cooker hoods separately with following units:
RIRS 200 V EKO with "Aut. RIRS-200VEEC-...k (+ 15..25
RIRS 300 V EKO with "Automatika RIRSV 300 VE" automatics.
This function is possible only with the units that have integrated automatics.
Remote controllers ensures comfortable operation, monitoring, maintenance and safety. All operations are per-
formed remotely by using controller, which shows fault reports and maintenance conditions.
Features:
• Exceptional and ergonomic design;
• Casing: plastic;
• Screen: tempered glass;
• Easy operation;
• Surface mounted;
• One touch control;
• Easily controlled;
• Numbers displayed at screen;
• Acoustic response to touch;
• Can be connected to BMS network;
• Can be directly connected to fan controlled with 0 - 10 VDC signal;
• CO or pressure sensor can be connected by using 0 - 10 VDC output;
2
• 4 selectable speeds;
• Maximum fan speed for limited time period (boost);
• Blocking (locking) - protection from children;
• In the user menu, parameters of sound, standby menu and CO
Package includes:
Stouch controller, cable (13 m), fastening elements (screw 3,9 x 25 DIN 7981-2 pcs. nylon plug 5 x 25 - 2 pcs.,
hammered steel plug 12 x 30 - 2 pcs.), technical manual.
Dimensions
1,5 mm
34
20,5 mm
or ECO_v107
1
C)" automatics;
o
can be changed.
2
84 mm
controller;
2
www.salda.lt