First Lighting - Rizzoli Rte 60 Gebrauchsanweisung

2.14

FIRST LIGHTING

Before starting to use the thermal cooker, re-
move the packaging materials in the oven and in
the wood box, remove the stickers and remove
the plastic film in which is wrapped the plate and
remove with a rag the most of the oil on its sur-
face. Before lighting the thermal cooker, it must be
connected to a working heating system and water
2.15 SETTLEMENTS
The refractory mortar used for the internal walling
contains always a little moisture that is eliminated
after the first periods of use: so it is normal that
the first times you light the thermal cooker a little
condensation is being generated. All the refractory
materials inside the thermal cooker experience a
settlement process that may generate small holes
on the bricks, such holes do not preclude anyway
must be present in the boiler. We suggest to make
a first lighting of the thermal cooker just to verify
the correct installation. The first lighting must be
done with moderate fire, using little wood broken
in small pieces. In the next lightings you can pro-
gressively increase the load of combustible.
the working of the thermal cooker. Other settle-
ments may involve other parts of the thermal
cooker so during the heating and cooling phases
you might hear light noises. These symptoms do
not absolutely preclude the use of the thermal
cooker and fading out till disappearance with the
constant use of the thermal cooker.
116