Delay Start - AEG LAVAMAT 82470 BI Benutzerinformation

E

DELAY START

The display shows the following information:
• Duration of the selected programme
– After setting a programme, the duration is displayed in hours and
minutes (for example
– After the programme has started, the remaining time is updated
every minute.
• Delay start
– When setting a delay start, the display shows the delay time (20
hours max.) for about 3 seconds (for example
shows again the programme duration.
– The delay time value decreases by one unit every hour and then,
F
one hour before the end of the programme, the time decreases ev-
ery minute.
• Incorrect option setting
– In case of wrong setting the display shows the message Err and the
yellow light of the button 8 starts blinking.
• Alarm codes
– If an operating problems occur, the display can show some alarm
codes, for example
• End of the programme
– At the end of the programme the display shows blinking zero
the symbol
G TIME SAVING
DOOR
• This symbol indicates if the door can be opened:
– The symbol is on: the door cannot be opened. The appliance is
H
performing a washing programme.
– The symbol is off: the door can be opened. The washing pro-
gramme is finished.
Available options: PREWASH
I
RINSE
- symbol.
(see chapter «Troubleshooting»).
disappears and the door can be opened.
- option symbol.
- symbol
).
, STAIN , SENSITIVE
ENGLISH
9
), and then it
,
, EXTRA