Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GUARANTEE AND GUARANTEE POLICY
If any part is found to be defective due to faulty manufacture
within the guarantee period, Husqvarna, through its
Authorised Service Repairers will effect the repair or
replacement to the customer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna.
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
SERVICE RECOMENDATIONS
•
Your product is uniquely identified by a silver and black product rating label.
•
We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.
REPLACEMENT PARTS
Blade
Part no.:
531211017
EC DECLARATION OF CONFORMITY
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category............................Electric Rotary Lawnmower
Type(s) ........................... SL546E, SL546ED
Identification of Series.......See Product Rating Label
Year of Construction..........See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
product(s) corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the Value a h given in the table.
2000/14/EC: The Measured Sound Power L
figures.
Conformity Assessment Procedure.........
Notified Body...........................................
Newton Aycliffe 28/09/2010
M.Bowden
Global R&D Director - Walk behind
Husqvarna UK Ltd.
Keeper of technical documentation
Type
Width of Cut (cm)
Speed of rotation cutting device (rpm)
Power (kW)
Measured Sound Power L
Guaranteed Sound Power L
Level (dB(A))
Uncertainty (dB(A))
Value a h (m/s
Uncertainty K of a h (m/s
Weight (Kg)
at the operator's position, recorded on a sample of the above
pA
& Guaranteed Sound Power L
WA
Annex VI
Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
(dB(A))
WA
(dB(A))
WA
2
)
2
)
ENGLISH - 4
this Operator's Manual and understand how to operate
and maintain your machine:
Failures not covered by guarantee
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in accordance
with the instructions and recommendations contained in
this Operator's Manual.
* Machines used for hire are not covered by this guarantee.
* The following items listed are considered as wearing parts
and their life is dependent on regular maintenance and
are, therefore not normally subject to a valid warranty
claim: Blades, Electric Mains cable
* Caution!
Husqvarna does not accept liability under the warranty for
defects caused in whole or part, directly or indirectly by the
fitting of replacement parts or additional parts that are not
either manufactured or approved by Husqvarna , or by the
machine having been modified in any way.
values are according to the tabulated
WA
SL546E
46
2,900
1.6
95
96
84
2.5
5.0
1.5
26
SL546ED
46
2,900
1.8
95
96
84
2.5
5.0
1.5
30.5
Werbung
Inhaltsverzeichnis
