Bartscher Deluxe Bedienungsanleitung Seite 31

Changing settings
•
Time and temperature values can be changed at any moment. Important: higher
temperature settings and longer cooking times result in darker waffles
•
Turn the device on. A short audio signal will be heard, the green control light will come
on and the digital display will show the initial time setting.
•
You can now set the temperature and time according to the instructions below.
Temperature
→ Press and hold the button labeled SET.
→ Press and hold the START / STOP button. The defined temperature will be
displayed.
→ To change settings, press the "+" and "-" buttons until the digital display shows
the desired temperature.
Time
→ Press the button labeled SET. The defined time will be displayed.
→ Press and hold the button "+" and "-". Change the setting using the START /
STOP button. Press the button until the desired time is displayed. Holding down
the START / STOP button will change the time on the display quicker.
→ When the display shows the desired time, release the buttons.
→ Next, activate the program with the new settings using the START / STOP button.
→ The display will show a countdown of the set time. When "0" is reached, an
alarm will sound. Press START / STOP to finish the program. The alarm will stop
sounding, and the display will again show the previously set time.
NOTE!
The last time and temperature values will remain set until new ones are entered.
Values are also saved when the device is turned off.
- 30 -