Frost Protection; Accessories - Siemens TE501 Gebrauchsanleitung

en
The appliance has been cleaned, descaled
and is ready for use again.
Important: Wipe down the appliance using
a soft, damp cloth to immediately remove
any descaler residue. Such residue can
cause corrosion. New sponge cloths may
contain salts. Salts can cause rust film
on stainless steel and must therefore be
washed out thoroughly before use.

Frost protection

To avoid damage caused by frost
A
during transport and storage, the
appliance must be completely
emptied first.
Information: The appliance must be ready
for use and the water tank (16) filled.
1� Place a large container under the milk
frother outlet (6)�
2� Press the steam button (11)�
F
LED flashes and the appliance now
heats up for approximately 20 seconds.
F
3� If LED lights up, open the milk frother
(6) by pulling it out and release steam
for about 15 seconds�
4� Press the power on/off switch O / I (9) to
switch off the appliance�
5� Empty the water tank (16) and the drip
tray (8).
34

Accessories

The following accessories are available
from retailers or from customer service:
Accessories
Cleaning tablets
Descaling tablets
Water filter
Care set
Ordering number
Retail /
Customer service
TZ60001 / 00310575
TZ80002 / 00576693
TZ70003 / 00575491
TZ80004 / 00576330