Herunterladen Inhalt Inhalt Diese Seite drucken

OPTi CJ-1785 Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
CJ1785_Victor_IM_203.qxp
Specifications:
Supply voltage: 220-240V ~ 50/60 Hz
Power: 1850-2200 W
Volume: 1.7l
List of parts
1
3
5
6
1. Button for opening the Lid
2. On/Off Switch
3. Filter
4. Handle
5. Water Level Indicator
6. Power Base Unit
7. Control light
Before Use
• Remove any packing material from the kettle.
• Before connecting to a power source, make sure your
mains supply voltage is the same as the one indicated on
the label on the underside of this appliance.
• Fill the kettle to the maximum mark (without the base
unit). Bring to the boil and then discard the water. Repeat
this procedure two more time. This removes any residues
that may have reminded from the manufacturing process.
Remove and rinse the filter before use.
How to use
• With the kettle switched off (0), connect the plug into
a suitable power outlet.
• Remove the kettle from the base unit before filling with
water.
• Do not fill through the spout.
• To open the lid pull the lid backwards towards the handle
to rest the lid on its hinge.
• Fill the kettle with no less than the minimum amount
(0.5 litres approximately) and no more then the maximum
level mark allows. To ensure that the kettle is not over-
2010-10-13
15:07
Page 7
CORDLESS KETTLE CJ-1785 Victor
MANUAL INSTRUCTION
• Ensure the kettle is fully seated on the power base and
• The On/Off indicator light will illuminate illustrating that
2
• When water reaches boiling point, the kettle will auto-
• You may also manually switch off the kettle by gently
4
• This appliance is not intended for use by persons (including
7
Warning: If this product is filled above max. level, hot water
may be ejected.
Cleaning
• Always unplug from the plug socket before cleaning.
• Clean the exterior surface of the kettle with a damp cloth.
• This kettle feature a concealed heating element which
• The filter inside the kettle needs to be cleaned periodi-
(Black plate)
filled always check the water gauge with the kettle on its
base unit.
then switch the kettle On (I) by depressing the On/Off
switch. Be sure to fully replace the lid to ensure proper
operation.
the kettle is in operation.
matically switch off and the indicator light goes out.
pressing the top of the On/Off switch (end nearest the
indicator light) downwards.
children) with reduced physical, sensory or mental capa-
bilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.
Children should be supervised to ensure that they do not
play with the appliance.
Do not use steel wool pads or abrasive cleaners. Do not
immerse the kettle, the base unit, cord set or plug in
water or liquid of any kind.
means it never comes into contact with the water inside
the kettle. This hygienic design not only makes cleaning
the inside of the kettle much easier, it also keeps cleaning
to a minimum.
cally, how often will vary according to where you live and
how often you use your kettle. You should clean it when-
ever there are any noticeable deposits left on the filter
and especially if the rate of pouring begins to reduce.
UK
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis