Optimum CJ-1202 Bedienungsanleitung Seite 11

CJ1202_CJ1203_IM_205.qxp
• This kettle feature a concealed heating element which
means it never comes into contact with the water inside
the kettle. This hygienic design not only makes cleaning
the inside of the kettle much easier, it also keeps clean-
ing to a minimum.
• The filter inside the kettle needs to be cleaned periodi-
cally, how often will vary according to where you live and
how often you use your kettle. You should clean it when-
ever there are any noticeable deposits left on the filter
and especially if the rate of pouring begins to reduce.
• Although the kettle is designed for the element to remain
scale free, in hard water areas scale may still build up on
the base. Descale regularly using a proprietary descaler.
Cleaning the Filter
Removing/Refitting the Filter:
Important: Before removing or refitting the filter, switch the
kettle off, let it cool down fully, and unplug the power base.
To remove the filter:
• Empty the kettle and open the lid.
• Take hold of the top of the filter and pull upwards, paying
particular attention on how the filter locates. The filter
should slide out of the grooves without having to use
excessive force.
To clean the filter:
• Rinse under a tap whilst brushing with a soft brush.
To refit the filter:
• Make sure that your hands are clean and free from soap,
cream or anything which might taint the water.
• Holding the top of the filter replace the filter ensuring the
locking tab of the filter clicks into position and the filter is
located at each side of the kettle.
CAUTION: THIS APPLIANCE GENERATES HEAT DURING USE.
PROPER PRECAUTIONS MUST BE TAKEN TO PREVENT THE
RISK OF BURNS, SCALDS, FIRES OR OTHER DAMAGE TO
PERSONS OR PROPERTY CAUSED BY TOUCHING THE EXTE-
RIOR WHILIST IN USE OR COOLING.
2010-10-13 19:03 Page 11
Ecology – Environmental Protection
The "crossed-out trash bin" symbol on electrical
equipment or packaging indicates that the device
cannot be treated as general household waste
and should not be disposed of into containers for such
waste.
Obsolete or broken-down electrical device should be
delivered to special designated collection points, organized
by local public administration, whose purpose is to collect
recyclable electrical equipment.
This way, each household helps reduce possible negative
effects influencing natural environment and allows the rec-
laiming of materials which the product is made of.
(Black plate)
Weight: 0,85kg
e
11