auna Kara Illumina Bedienungsanleitung Seite 19

Prev Button
• Tap once to skip back to the start of the current song during playback or skip back to the previous
song during stop mode.
Repeat Function
• During CD/CD+G/MP3 playback on CD/CD-R/CD-RW/USB Flash Drive tap once for Repeat 1 (RE-
PEAT INDICATOR in LED DISPLAY will flash) to playback current song only;
• Tap again for Repeat All (REPEAT INDICATOR will light steadily) to repeat all available tracks on the
disc;
• Tap again to cancel Repeat mode (REPEAT INDICATOR will be OFF).
Program Function
This function allows music tracks to be played in a programmed sequence. NOTE: Program function can
only be set in STOP mode.
1 Press the PROGRAM button once. Program Number 01 will display and PROGRAM INDICATOR will
flash.
2 Press the SKIP FORWARD or SKIP BACKWARD button to select the track to be programmed.
3 Press the PROGRAM button again to store the selection. The Program number. will advance to 02
to prompt for the next input.
4 You may repeat steps #2 to #3 to program up to 20 (CD)/99 (MP3) tracks. As soon as you have ente-
red the 20th (CD)/99th (MP3) track, the LCD DISPLAY will show "FU", indicating that program is full.
5 Press the PLAY button to complete and start program play. Press STOP button to stop program play.
6 You may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks (Repeat
All) in the Program Play Mode.
7 The CD player will stop when all the programmed tracks have been played through once. To repeat
program play, press the PLAY/PAUSE button.
8 To cancel program play, press the STOP button twice while program play is running or open the CD
DOOR in stop mode.
Up to 20 (CD)/99 (MP3) tracks can be programmed.
If you attempt to program more than 20 (CD)/99
(MP3) tracks, "FU" will appear in the LED DISPLAY
and "PROG FULL" will appear on the TV screen as
shown below (if connected).
19
www.auna.de