Herunterladen Inhalt Inhalt Diese Seite drucken

Control Panel Operation - AUS Pro86 Mix Euro Bedienungsanleitung

Banknotenzahlmaschine mit der uberprufung und erkennung des nominalwertes einer euro banknote
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• Technical maintenance and cleaning shall be carried out only in certified service centers.
• If the device was exposed to cold for an extensive period of time, it is necessary to keep it
at the room temperature for no less than 6 hours, when the device has not been stored in a
box. If the device has been stored in a box while exposed to cold temperature, allow the
device to rest at room temperature for 12 hours prior to use. Remember the manufacturer is
in no way responsible for damage to the device or injury to the operator in the event of
incorrect operation /care of the device.
5

Control panel operation

«VALUE» button – Selects counting modes: VALUE / COUNT.
«SORT» button – Selects counting modes: SORT / COUNT.
«START» button – Starts and continues counting, nulls, resets error messages, returns to the
main menu.
«BATCH» button – enters number value BATCH 100, 50, 25, 20, 10, 0. To enter the value,
press the button several times. To adjust the BATCH value use buttons «+10», «+1» , «-1».
«SPEED» button – Adjusts the counting speed. In "COUNT" mode the counting speed is set
in the range of 900/1200/1500 banknotes per minute, which corresponds to SPEED I, SPEED
II, and SPEED III levels. In «VALUE» and «SORT» modes the counting speed is 1200
banknotes per minute.
«MNL» button – turns on / off manual start mode. In automatic mode, the indicator MNL is
switched off in the display, the device starts counting automatically after you put banknotes
into the hopper. In the manual mode, the MNL indicator is lit on the display, the device starts
counting another stack of banknotes after you press button «START».
«ADD» button – turns on/off the banknote summation mode by sum and number. In ADD
mode, the indicator «ADD» is lit on the display.
«CF» button – enters/exits UV, DEN detection menu. When pressing "CF" button the
changing UV value starts to blink. When pressing "CF" button for the second time the
changing DEN value starts to blink.
«LIST» button – monitors banknotes' distribution by denomination in "VALUE" mode. In order
to view the number of counted EURO banknotes of all denominations, press "LIST" button
several times:
PCS
NOMINAL EUR
Fig.3
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis