Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications; Safety Precautions And Maintenance Rules - AUS Pro86 Mix Euro Bedienungsanleitung

Banknotenzahlmaschine mit der uberprufung und erkennung des nominalwertes einer euro banknote
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Hopper
2. Control panel
3. Carrying handle
4. Auxiliary hopper plates
5. Paper thickness adjustment screw
6. Power switch
7. Power cord
8. RS-232 port for connecting with PC
9. Rear cover
10. Stacker
11. Port for external display
12. Port for remote magnifying glass PRO L-10XP
13. External display
14.
Remote magnifying glass PRO L-10XP
3
Counting speed, banknotes/min .......................................................................900/1200/1500
Hopper capacity, banknotes: ..............................................................................................500
Stacker capacity, banknotes ..............................................................................................200
Suitable banknote size (LxW), mm: ..............................................................120x60 – 172x87
Thickness of countable banknote, mm ....................................................................0.08 - 0.12
Power supply, V/Hz ......................................................................................................220/50
Power consumption, W.........................................................................................................50
Net weight, Kg / Pounds ...............................................................................................5.5 / 12
Dimensions, mm / inch .............................................................270x250x240 / 10.6 х 9.9 х 9.5
4
Warning: this device is intended to operate from the power source 220V/50Hz. The
user shall use electric power cord with a ground contact.
Do not use power cable or power cord without ground contact.
• Read this manual before operation
• The manual should be available to operator
• Do not use this device under the following conditions:
- The device is not resting on a level surface
- The device is in an excessively dusty or polluted room
- The device will be exposed to vibration while in use
- The device is exposed to direct sunlight or strong directional interior lighting
• Do not operate the device with wet hands
• During operation, do not touch the moving parts of the counter
• Do not expose to water (or other liquid).
• Avoid foreign objects, paper clips, and staples
• Avoid dropping the device
• When finished be sure there are no banknotes in the hopper or transport system
• Clean the device regularly and service the device as needed at a licensed service center to
ensure the device will function within its specified parameters
• Do not disassemble, repair or attempt to update the counter on your own. This can result
in damage to the device or injury to the operator.

Safety precautions and maintenance rules

Specifications

5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis