AEG Beat 15 Bedienungsanleitung Seite 27

Press (Left soft key) to confirm.
10.4.3 De-register a handset
This operation should only be necessary if one of your handsets
becomes faulty or lost and needs to be replaced.
You will need to enter the 4-digit system PIN (default 0000) in order to
de-register a handset from the base station.
A de-registered handset will have the
on the display.
Note:
You cannot de-register the handset that you are currently using.
Press (Left soft key) and
Press (Left soft key) and
Press (Left soft key) to show "PIN?----".
Enter the 4-digit system PIN.
Press (Left soft key) and the first registered handset number is
displayed.
Press / to select the handset you want to de-register.
Press (Left soft key) to confirm.
10.4.4 Change the Flash (Recall) time
You may need to change the recall (flash) time if your phone is
connected to a PBX. The recall time options are SHORT (the UK default
value of 100ms), MEDIUM (300ms) or LONG (600ms).
Press (Left soft key) and
Press (Left soft key) and
Press (Left soft key) and
("SHORT", "MEDIUM", "LONG", with the current selection indicated
by a *).
Press (Left soft key) to confirm.
10.4.5 Change the system PIN code
A 4-digit system PIN code is used for changing the system settings of
the base station. It is used to protect your phone against unauthorised
use. The default system PIN code is 0000.
Press (Left soft key) and
Press (Left soft key) and
Press (Left soft key) to show "OLD PIN?----".
Enter the old system PIN.
icon flashing and "REGISTER"
/ to select "BS SETTINGS".
/ to select "DELETE HS".
/ to select "BS SETTINGS".
/ to select "FLASH TIME".
/ to select your desired flash time
/ to select "BS SETTINGS".
/ to select "CHANGE PIN".
27