Memory Manager - LG KF310 Benutzerhandbuch

Note
Three incorrect PIN code entries in the
PIN code entry window would invalidate
the PIN code. In this case, you have to
enter the PUK (PIN Unblock Key) code
to configure the PIN code again. The
maximum number of times you may
enter the PUK code is 10. (Note: If you
enter an incorrect PUK code10 times,
the USIM card will be blocked and must
be replaced.)
PIN2 code
PIN2 is the abbreviation for Personal
Identification Number 2, and is used to
restrict use by unauthorised users as with
the PIN. The PIN2 code change procedure
is the same as the one for the PIN code.
3 incorrect PIN2 code entries would
invalidate the PIN2 code. In this case, you
have to enter the PUK2 code in order to
use the PIN2 code again. The maximum
number of times you may try to enter the
PUK2 code is 10, like PUK1. 10 incorrect
PUK2 code entries would invalidate the
PIN2 code.
Security code
The security code is used to change the
mobile phone password. The maximum
number of attempts to enter the security
code is not limited as it is with PIN and
PIN2.

Memory manager

Handset common memory
This function shows the status of the user
memory of the mobile phone. Since this
function scans the overall file system for
statistics, a few seconds are required.
Handset reserved memory
This function shows the status of the User
reserved memory. The usual contents are
Text msg, Contacts, Calendar, To do, Memo,
Alarms, Call history, and Bookmarks. And
it gives a clear illustration of the actual
amount compared with the total amount
for each item.
USIM memory
This function shows the status of the USIM
card user memory.
Menu 7.7
53