Display Illumination - Bosch GLM 40 Professional Originalbetriebsanleitung

OBJ_BUCH-2264-003.book Page 30 Friday, December 18, 2015 2:54 PM
30 | English
Press button 6 [+] or button 3 [–] to change the unit of measure
again. "0'00''" is shown at the bottom of the display.
To exit the menu item, press the measuring button 2 [
5 [ ]. The selected setting remains saved after you switch off the measuring tool.
Switching the Sound On and Off
The sound is switched on by default.
Switch the measuring tool on.
Press and hold button 4 [Func] until " " and "mft" flash on the dis-
play. "0.000 m" is shown at the bottom of the display.
Press and hold button 4 [Func] again until " " and "Sound" flash on
the display. "On" is shown at the bottom of the display.
Press button 6 [+] or button 3 [–] to switch off the sound. "OFF" is
shown at the bottom of the display.
To switch on the sound, press button 6 [+] or button 3 [–] again.
To exit the menu item, press the measuring button 2 [
5 [ ]. The selected setting remains saved after you switch off the measuring tool.

Display Illumination

The display illumination is continuously switched on. When no button is pressed, the
display illumination is dimmed after approx. 10 seconds to preserve the batteries/re-
chargeable batteries. When no button is pressed for after approx. 30 seconds, the
display illumination goes out.
1 609 92A 23E | (18.12.15)
] or the On/Off button
] or the On/Off button
Bosch Power Tools