Re-Record Greeting Using Remote Access - AUDIOLINE AB830 Bedienungsanleitung

Note: While you are listening to the messages, the unit asks every 2 minutes and 40
seconds, whether you still want to carry on listening. The answering machine stops
and you will hear three signal tones. Enter any number to continue playing back the
messages.
While playing back, you have the following facilities:
Skip current message
Repeat current message
Repeat previous message
Delete current message
After the last message, the machine answers with several signal tones. Now, within
the next 7 seconds, you have various possibilities. If you do not make any input
within these 7 seconds, the connection will be cut off automatically and all messages
will remain saved.
Repeat all messages
Delete all messages
Switch off answering machine
After this input, the answering machine is no longer ready for operation.
Save all messages
5.4

Re-record greeting using remote access

Call your own telephone number and allow the greeting message to run
through to the end. Wait until your answering machine is ready to record a
message.
After the signal tone, enter your personal authorisation code by pressing the
appropriate numbers on the number pad of a telephone. Two signal tones
confirm that the right code has been entered.
To re-record the greeting message, press the key combination 7 and #.
Dictate your new greeting after the signal tone.
Complete the recording with the keys 7 and #. The new greeting will now be
repeated automatically.
Finish the call by putting the receiver down.
- Remote access -
Press 7 and #
Press 8 and #
Press 6 and #
Press 3 and #
Press 2 and #
Press 3 and #
Press 9 and #
no input
27