Pacotizing - Pacojet Junior Bedienungsanleitung

EN
7.2

Pacotizing

1.
2.
3.
18
Switch on the Pacojet Junior at the mains switch (5):
the device switches to "operating mode". The Pacojet
Junior is ready for use.
If the device is in "standby mode", operate the
"START KEY" to switch to "operating mode".
Risk of injury due to incorrect
handling of the pacotizing
blade!
• Never touch the sharp edges of
the pacotizing blade (9).
• Always hold the pacotizing blade
with two fingers at the corners
between the blades!
Insert the pacotizing blade (9) into the spray guard (8)
by inserting the head of the pacotizing blade into the
hole in the spray guard.
While doing so, make sure that the flat side of the
spray guard is pointing downwards towards the
pacotizing blade.
Before completing this step, make sure that the
preliminary scraper (8a) is attached to the spray
guard and that the lip of the scraper is pointing
towards the pacotizing blade.
Note
Damage to property caused by incorrect
attachment of the pacotizing blade to the
spray guard!
• Never attach the combination of the pacotizing
blade (9) and spray guard (8) to the protective
beaker (12) / pacotizing beaker (10) before
processing. This can result in damage to the
device and its accessories!
• Always attach the combination of the pacotizing
blade and spray guard to the beveled magnetic
blade holder before attaching the protective
beaker.
Caution